|
Capsule 500 Pound Extension Ring With Extended Auger
Deer Feeders & Stands
|
$ 299.99
|
If you've already purchased a 500 lb Capsule but wish to expand it to a 1000 lb feeder, no problem. Our expansion ring kit consists of a 12'' tall section that simply bolts between the feeder and the base, and a longer auger. You can quickly and easily convert your Capsule feeder to feed a variety of feeds to a variety of animals. Additional shipping charges will apply.
|
|
|
|
Capsule Game Feeder 1000 lb
Deer Feeders & Stands
|
$ 1299.00
|
•Holds 1000 lbs of feed. Includes heavy duty motor, extended auger, spinner plate, heavy duty 12 volt, 7 amp hour battery, solar charger, heavy duty programmable timer and varmint guard.
•Capsule Feeders assemble in minutes using seven Phillips-head bolts. The unit is almost four foot in diameter and weighs about 100 lbs when empty. Two units (assembled) can fit in the back of a standard pickup truck.
•Typically used as a broadcast feeder for corn or fish food, the spinner can be removed for use with protein or pellet trays. Corn and pellets and milo may be combined if desired. Capsule feeders are designed to ''completely empty'', using a first-in first-out feed cycle.
•Heavy duty molded-in handles make moving it a breeze. A short rebar or ''T'' post can be driven through the handle for added security although rarely required.
•All Capsule feeders come with a 20 Year Limited Warranty. Additional shipping charges will apply.
|
|
|
|
Capsule Game Feeder 500 lb
Deer Feeders & Stands
|
$ 999.00
|
•Holds 500 lbs of feed. Includes heavy duty motor, auger, spinner plate, heavy duty 12 volt, 7 amp hour battery, solar charger, heavy duty programmable timer and varmint guard.
•Capsule Feeders assemble in minutes using seven Phillips-head bolts. The unit is almost four foot in diameter and weighs about 100 lbs when empty. Two units (assembled) can fit in the back of a standard pickup truck.
•Typically used as a broadcast feeder for corn or fish food, the spinner can be removed for use with protein or pellet trays. Corn and pellets and milo may be combined if desired. Capsule feeders are designed to ''completely empty'', using a first-in first-out feed cycle.
•Heavy duty molded-in handles make moving it a breeze. A short rebar or ''T'' post can be driven through the handle for added security although rarely required.
•All Capsule feeders come with a 20 Year Limited Warranty.
500 pound extensions are available to convert to 1000 pound capacity! Additional shipping charges will apply.
|
|
|
|
Directional Plate for Capsule Game Feeder
Deer Feeders & Stands
|
$ 99.99
|
Made of stainless steel, the directional plate is designed to control the broadcast direction. Whether you're feeding fish from the bank or wish to hide your feeder from the road or sendero, the directional plate is a handy accessory. It attaches easily to the power head of the Capsule feeder using Phillips screws.
|
|
|
|
Large Tray for Capsule Game Feeder
Deer Feeders & Stands
|
$ 239.99
|
•Designed to use with both the 500 lb and 1000 lb feeders. Four trays are securely fastened to the cone using eight large phillips bolts. The bolts screw into heavy duty brass lugs that are molded into every capsule feeder. A skirt is attached to deflect the feed into the tray. When the spinner plate is removed, feed flows gently into the trays.
•The large tray kit is molded of thick high-density polyethylene plastic. Perforated for drainage, the trays will not rust or corrode.
•When installed on the 1000 lb feeder, the tray is about 33 inches off the ground. When used with the 500 lb feeder, the trays are about 20 inches off the ground. The large tray kit holds approximately 40 lbs of feed. *Requires Extra shipping cost due to size
|
|
|
|
Small Tray for Capsule Game Feeder
Deer Feeders & Stands
|
$ 179.99
|
•The small tray kit is typically used to feed pellets. Made of 3/8'' tough, high density polyethylene, the tray cannot be chewed up by animals. It will not rust or corrode. The tray comes with a durable skirt to deflect feed into the tray. Most users remove the spinner plate so feed flows gently into the tray. Perforated to allow water to drain, the tray holds about 20 lbs of feed or corn.
•The small tray attaches quickly and securely to the standard feeder using existing assembly bolts. When installed, the tray is about 33 inches off the ground, 27 inches in diameter and four inches deep. *Requires Extra shipping cost due to size
|
|
|
|
EWT 55 Gallon 350 lb. Heavy Duty 14' Tri-Pod Feeder With Winch
Deer Feeders & Stands
|
$ 450.00
|
This is hands down the best crank up tri-pod feeder on the market! This feeder comes standard with a heavy duty 55 gallon barrel with solid one piece spun funnel, 1600 lb. winch, 4000 lb. aircraft cable, one piece square steel tubing legs with steel plate and predrilled hole welded off the bottom of each leg for stability when anchoring and seamless one piece galvanized lid with 3 inch lip. When this feeder is cranked up it is held in place by 3 support brackets at the top that also hold the lid in place. Simply crank down to ground level, lid lifts off easily, fill replace lid and crank back up. No leaky lids, no support chains, no more removing support bars to get the lid off, no more hardware to keep your lid on and no more climbing ladders! Best of all, NO MORE COONS! Control box with 12 volt timer, battery and solar panel can be included for an additional $169.95 or our economy version without battery and solar panel for $129.95!
DELIVERY OF THIS PRODUCT IS UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP IS AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
EWT 55 Gallon 350 lb. Heavy Duty Corn Feeder
Deer Feeders & Stands
|
$ 290.00
|
The staff of Elusive Wildlife Technologies has tried just about every feeder on the market, and we were not impressed. We were forced to build our own feeders for personal use, due to the lack of quality and dependability of what the current market had to offer. Shortly there after we received many request from lease members and hunting friends that wanted us to manufacture some for them and their friends, and the rest is history. If you fall into this same category then this is the corn feeder for you. Control unit with timer not included. Feeder with our best deluxe 12 volt control unit, THE-TIMER, battery, solar panel and standard spinner plate is $460.00
*To find out more about this feeder, click on product name above*
DELIVERY OF THIS PRODUCT IS NOT AVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP IS AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS
|
|
|
|
EWT Heavy Duty 100 lb. Tree Mount Feeder With Winch
Deer Feeders & Stands
|
$ 275.00
|
The perfect feeder for those elusive game animals you want to attract to your favorite hunting locations. We could not find a medium size hanging feeder that met our standards at EWT, so we built our own. This feeder is built to our standards for durability and dependability. It holds a little over 100 pounds and comes with a one piece spun aluminum funnel for proper feed dispersion. To find out more about this feeder or enlarge the pictures of this product click again on product photo. Control unit with timer not included. CALL FOR PRICE!
*DELIVERY ON THIS PRODUCT IS UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP AVAILABLE AT OUR WAREHOUSE IN CONROE, TEXAS.
|
|
|
|
Strong Arm Hydraulic Feeder Lift
Deer Feeders & Stands
|
$ 249.99
|
The Stong Arm Feeder Lift allows you to fill your feeder without using ladders! The hydraulic arm is raised by operating a jack handle on the bottom of the unit. To lower your feeder simply turn the tension release knob and watch your feeder make a smooth & controlled descent to the ground.
Great for those who have problems with hogs, bears, or livestock damaging feeders. It also makes an excellent hoist for cleaning and skinning large game.
Easy to assemble and install for one person. Attaches to a tree or pole using the included webbing and safety chain. Comes with support bars for 30- and 55-gallon barrels. Feeder/barrel not included.
|
|
|
|
|
|
|
|
Hog Feeder With Built In Automatic Hoglight System! Limited Time Sale!
Deer Feeders & Stands
|
$ 1499.99
|
|
Heavy duty and made to last! If you are looking for a time proven hog feeder that will stand up to the punishment of hogs, cattle, raccoons and varmints that has a built in permanent automatic hog light system built in then look no further! We took the guess work out for you! This feeder comes ready to set up and start hunting the big hogs at night! This feeder comes complete with all the bells and whistles. *Click on picture of feeder once more to read more and see more images of this feeder.
|
|
|
|
Boss Buck 1200 pound Protein Feeder
Deer Feeders & Stands
|
$ 699.00
|
Boss Buck Inc. 1,200 - lb. Protein Feeder... set this huge Feeder up and go about your other business! Fill up this 1,200-lb. Feeder, then get back to your life! You won't have to go back and forth ''checking on things'' with this durable dispenser. The hopper is made of 3/8''-thick, UV-protected plastic that will not rot, rust or leak when left in the field. Has 4 slots for the sturdy 105'' galvanized steel legs. Stand allows you to adjust the height from 108-132''. Interchangeable hardware components allow you to easily convert your feeder from automatic feeding in the cold months to gravity feeding in the summer. Has a reliable lid system as well... locks the lid down and overlaps 2'' over the hopper so no moisture can get in. Hopper weighs 60 lbs. and measures 61'' tall x 43 1/2'' wide. Features the 4-Way Protein Head to feed deer and other critters with ease. Keeps feed moisture-free with a drain hole to keep water out. The custom-designed head features a 10 angle, and a 1'' overhang on the 4'' feed ports. Has an inner cone to disperse feed evenly to each 10'' long port. The 4-way Head stands 36'' off the ground. Pick this innovative Feeder today!
DELIVERY OF THIS PRODUCT IS NOT AVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP IS AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
Boss Buck 350 lb Free Choice Protein Feeder
Deer Feeders & Stands
|
$ 289.00
|
The 350lb. capacity hopper is 3/8'' thick wall of HDPE UV Protected plastic that will not rot, rust or leak! This maintenance FREE hopper system , with 72'' feeder legs is the BEST SELLER in our line. With our Patented Free Choice Protein / Gravity Head you get the most moisture resistant free choice feeding system available on the market today! The Custom Designed head features a 10 degree of angle, and a 1'' overhang on the 4'' feed ports. Each feed port has a drain hole to disperse any water that enters the tip of the feed port. Our patented design features an internal cone that dispenses the feed evenly to the three ports. The adjustable height inner sleeve allows the user to control the feed flow of almost all feed shapes and sizes. Push it all the way up to virtually shut off the flow, or ease it down until you get the optimal flow on your favorite type of critter food.
Our double walled hatch LID tops this unit off in style, and function. Built oversized, this lid allows the hopper system to breath, thus eliminating condensation while achieving ambient temperature faster than Steel or Fiberglass feeders.
|
|
|
|
Boss Buck 600# Free Choice Protein Feeder
Deer Feeders & Stands
|
$ 550.00
|
''Dr. Deer'' James Kroll told us the Protein characteristics that the ULTIMATE FEEDER would have. We listened and here is the result. The ideal feeder for hunters and breeders! ''Doctor Deer'' himself signed off on it. The James Kroll ''Signature Series'',
600# Corn (approximately)
500# Large Protein Pellets (approximately)
''Protein'' Feeder Legs 84''
Hatch lid is 3'' deep
81'' from Ground to Lid
42'' Feed Height (Ground to Spout)
Inside spread of legs 40''
All galvanized hardware and stainless steel inserts.
Converts from protein to spin feeder in minutes!!
|
|
|
|
EWT 55 Gallon 350 lb. Heavy Duty Free Choice Protein Feeder
Deer Feeders & Stands
|
$ 279.99
|
This is our most economical free choice protein feeder we offer, but still built to last. This feeder is built out of a heavy gauge steel 55 gallon drum and the bottom has been replaced with a solid one piece spun funnel for proper feed distribution. Features a 3-way feeding tube 36 inches from ground level to minimize coon and other varmint use and is supported by three 1.5 inch square steel tubing legs.
DELIVERY OF THIS PRODUCT IS NOT AVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP IS AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
EWT Heavy Duty 800 lb. Free Choice Protein Feeder
Deer Feeders & Stands
|
$ 0.00
|
If your looking for a mid range free choice protein feeder to fit your budget and built to last this feeder is for you. This feeder is built with heavy gauge steel and 1.5 inch square tubing legs. Heavy duty ladder with platform shown can be purchased for an additional $99.95. CALL FOR PRICE! This feeder only sold in lots of 4 due to being custom built.
*DELIVERY OF THIS PRODUCT IS UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
EWT Heavy Duty 1500 lb. Free Choice Protein Feeder
Deer Feeders & Stands
|
$ 0.00
|
The highest quality for the lowest price. You have to see it to believe it.
Quick detach ladder with platform is optional, add $99.95. Click on product photo to enlarge image or to learn more about this feeder. This feeder only sold in lots of 4 due to being custom built.
CALL FOR PRICE!
*DELIVERY ON THIS PRODUCT UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP AVAILABLE AT OUR WAREHOUSE IN CONROE, TEXAS.
|
|
|
|
EWT Heavy Duty 8 Foot Tri-Pod
Deer Feeders & Stands
|
$ 299.99
|
Heavy duty tri-pod that does not need any cross braces. This tri-pod can very easily be moved from one location to the next unlike most other tri-pods of this size. Comes with all around adjustable shooting rail which can be lowered all the way down and stored away during archery season. Stand height based on 8 foot legs and Base is approximately 8 feet high.
*DELIVERY ON THIS PRODUCT IS UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
Woodesy Too Treestand
Deer Feeders & Stands
|
$ 249.99
|
|
Have you found the perfect spot to hunt but couldn’t find a straight tree to hang your stand or climber? The adjustable Woodsey Too Treestands Grey Ghost allows you to hang your stand on crooked or leaning trees and still have a level platform. Finally a stand that you can quietly swivel and shoot those deer that seems to always sneak in behind us. Adjustable to almost 45 degrees. 360 degree swivel seat. Guaranteed 100% Noiseless. 500lb weight capacity. No Tools Required. Weighs only 30lbs. *This item may require extra shipping depending on your location.
|
|
|
|
12 Foot Texas Folding Tripod
Deer Feeders & Stands
|
$ 369.99
|
|
This is a great strong easy to move and handle tripod. Change hunting locations quickley and easily by folding in the legs and just throw the whole thing over your shoulder. Move and set up this stand in minutes time! An optional gun rest or bow holder is also available. * 6 foot version is pictured
|
|
|
|
6 Foot Texas Folding Tripod
Deer Feeders & Stands
|
$ 299.99
|
|
This is a great strong easy to move and handle tripod. Change hunting locations quickley and easily by folding in the legs and just throw the whole thing over your shoulder. Move and set up this stand in minutes time! An optional gun rest or bow holder is also available.
|
|
|
|
9 Foot Texas Folding Tripod
Deer Feeders & Stands
|
$ 329.99
|
|
This is a great strong easy to move and handle tripod. Change hunting locations quickley and easily by folding in the legs and just throw the whole thing over your shoulder. Move and set up this stand in minutes time! An optional gun rest or bow holder is also available. 6 foot version is pictured
|
|
|
|
EWT Heavy Duty 10 Foot Tri-Pod
Deer Feeders & Stands
|
$ 329.99
|
Heavy duty tri-pod that does not need any cross braces. This tri-pod can very easily be moved from one location to the next unlike most other tri-pods of this size. Comes with all around adjustable shooting rail which can be lowered all the way down and stored away during archery season. Stand height based on 10 foot legs and Base is approximately 10 feet high.
*DELIVERY ON THIS PRODUCT IS UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
EWT Heavy Duty 12 Foot Tri-Pod
Deer Feeders & Stands
|
$ 379.99
|
Heavy duty tri-pod that does not need any cross braces. This tri-pod can very easily be moved from one location to the next unlike most other tri-pods of this size. Comes with all around adjustable shooting rail which can be lowered all the way down and stored away during archery season. Stand height based on 12 foot legs and Base is approximately 11 and 1/2 feet high.
*DELIVERY ON THIS PRODUCT IS UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
EWT Heavy Duty 14 Foot Tri-Pod
Deer Feeders & Stands
|
$ 399.99
|
Heavy duty tri-pod that comes with cross braces. Comes with all around adjustable shooting rail which can be lowered all the way down and stored away during archery season. Stand height based on 14 foot legs and Base is approximately 13 and 1/2 feet high.
*DELIVERY ON THIS PRODUCT IS UNAVAILABLE AT THIS TIME UNLESS PURCHASING MULTIPLE UNITS. CUSTOMER PICK UP AVAILABLE AT OUR RETAIL STORE IN CONROE, TEXAS.
|
|
|
|
Varmint Proof Spinner Plate For Feeders!
Feeder Control Boxes
|
$ 39.00
|
|
Stop wasting corn and start saving serious cash! This spinner plate will put an immediate stop to your corn thieves forever! This scatter plate is simply that, a scatter plate. Just remove your old plate and slip on this new spinner plate to halt your corn loss from wind, birds, squirrels, cows, hogs and yes, raccoons! You will be amazed at how long your feeder will last between fillups and yes this plate throws as good as or better than most any plate out there as well. Currently this plate will only work on ¼ shafts without adapters. Typically most 12 volt systems have a ¼ inch motor shaft.
|
|
|
|
|
|
|
|
12 Volt adjustable control unit. Price includes, the-timer, timer bracket, wiring harness, 12 volt heavy duty motor, 12 volt solar charger mounted on back of control box and 12 volt battery
Feeder Control Boxes
|
$ 169.99
|
|
12 Volt adjustable control unit with heavy duty motor. Price includes, the-timer, timer bracket, wiring harness, 12 volt motor, and 12 volt solar charger mounted on back of control box and 12 volt battery
|
|
|
|
|
|
Eliminator Varmint Proof Spinner Plate!
Feeder Timers & Accessories
|
$ 39.00
|
|
Stop wasting corn and start saving serious cash! This spinner plate will put an immediate stop to your corn thieves forever! This scatter plate is simply that, a scatter plate. Just remove your old plate and slip on this new spinner plate to halt your corn loss from wind, birds, squirrels, cows, hogs and yes, raccoons! You will be amazed at how long your feeder will last between fillups and yes this plate throws as good as or better than most any plate out there as well.Currently this plate will only work on ¼ shafts without adapters. Typically most 12 volt systems have a ¼ inch motor shaft.
|
|
|
|
|
|
|
|
|
|
|
|
Pro Spinner Plate for 1/4 inch Hub
Feeder Timers & Accessories
|
$ 22.00
|
|
The Pro Spinner Plate was created with 4 spring-hinged doors that open with the centrifugal force of the feeder motor and dispense the feed. When the motor stops, the doors move up into their original position creating a barrier around the down-spout to eliminate unnecessary loss of feed due to high winds, birds, scavengers, and regular feeder movements.
|
|
|
|
Pro Spinner Plate for 1/8 inch Hub
Feeder Timers & Accessories
|
$ 21.99
|
|
The Pro Spinner Plate was created with 4 spring-hinged doors that open with the centrifugal force of the feeder motor and dispense the feed. When the motor stops, the doors move up into their original position creating a barrier around the down-spout to eliminate unnecessary loss of feed due to high winds, birds, scavengers, and regular feeder movements.
|
|
|
|
Sharks Teeth Varmint Protection
Feeder Timers & Accessories
|
$ 19.99
|
This is ''IT''! No more need for varmint guards, traps, PVC pipes & cages. Shark Teeth work on the principle of abstinence. If they can't touch it, climb it, bump it or lick it; they can't tear it up, knock it over, eat up your feed or waste it! Shark Teeth come in 36'' strips that are 1 1/2'' wide. There are three to a set, and the set includes three self tapping screws per strip (9 total). Each strip has 4 parting lines 6'' apart. Each 6'' strip has 4 pre-punched holes. You can apply complete 36'' strips to feeder legs. Apply smaller pieces to Protein/Gravity Feeders heads or Control/Timer Boxes to create a barrier that repels just about anything!
|
|
|
|
Sneaky Feed
Feeder Timers & Accessories
|
$ 149.00
|
Sneaky Feed by Advanced Hunting Technologies allows you to manage any game feeder with wireless or bluetooth technology. Remotely monitor your battery voltage and your last feed time, or make a feed time change without disturbing your feeder and scenting up your most delicate hunting area!
Use your iPhone or Droid Device to check your battery level and feeder status and never blow another hunt again.
|
|
|
|
|
|
|
|
|
|
|
|
The -Timer
Feeder Timers & Accessories
|
$ 59.99
|
|
The best digital timer on the market! 5 year warranty, easiest to operate and Works with all existing control units 6 or 12 volts. *Click product photo to learn more!
|
|
|
|
The Redneck
Feeder Timers & Accessories
|
$ 39.99
|
The Redneck Timer - Easy to operate with a 5 year warranty. Compatible with any 6 or 12 volt control unit. Can feed up to 24 times a day. Timer runs on main battery only - No AA batteries needed. Fuse protected with easy 4 wire hook up, 2 to battery, 2 to motor. Uses the same harness as The-Timer.
|
|
|
|
|
|
|
|
|
|
Pages: | 1 | 2 |
|
